1Y0-A28 exam dumps

Why we are ahead of the other sites in the IT training industry? Because the information we provide have a wider coverage, higher quality, and the accuracy is also higher. So IT-Tests.com is not only the best choice for you to participate in the Citrix certification 1Y0-A28 exam, but also the best protection for your success.

Citrix 1Y0-A28 certification exam is very important for every IT person. With this certification you will not be eliminated, and you will be a raise. Some people say that to pass the Citrix 1Y0-A28 exam certification is tantamount to success. Yes, this is true. You get what you want is one of the manifestations of success. IT-Tests.com of Citrix 1Y0-A28 exam materials is the source of your success. With this training materials, you will speed up the pace of success, and you will be more confident.

Citrix 1Y0-A28 authentication certificate is the dream IT certificate of many people. Citrix certification 1Y0-A28 exam is a examination to test the examinees' IT professional knowledge and experience, which need to master abundant IT knowledge and experience to pass. In order to grasp so much knowledge, generally, it need to spend a lot of time and energy to review many books. IT-Tests.com is a website which can help you save time and energy to rapidly and efficiently master the Citrix certification 1Y0-A28 exam related knowledge. If you are interested in IT-Tests, you can first free download part of IT-Tests's Citrix certification 1Y0-A28 exam exercises and answers on the Internet as a try.

Exam Code: 1Y0-A28
Exam Name: Citrix (Implementing NetScaler 10 for Networking and Traffic Optimization)
Free One year updates to match real exam scenarios, 100% pass and refund Warranty.
Total Q&A: 123 Questions and Answers
Last Update: 2014-01-21

IT-Tests.com is a professional website to specially provide training tools for IT certification exams and a good choice to help you pass 1Y0-A28 exam,too. IT-Tests.com provide exam materials about 1Y0-A28 certification exam for you to consolidate learning opportunities. IT-Tests.com will provide all the latest and accurate exam practice questions and answers for the staff to participate in 1Y0-A28 certification exam.

IT-Tests.com has a huge team of IT experts, who continue to use their knowledge and experience to study a lot of IT certification examination papers of past few years. Their findings of the research is now the product of IT-Tests, therefore IT-Tests's Citrix 1Y0-A28 practice questions are very similar with the real exam, which can help a lot of people to realize their dreams. IT-Tests.com can ensure you to successfully pass the exam, and you can boldly Add IT-Tests's products to your shopping cart. With IT-Tests.com your dreams can be achieved immediately.

IT-Tests.com's Citrix 1Y0-A28 exam training materials' simulation is particularly high. You can encounter the same questions in the real real exam. This only shows that the ability of our IT elite team is really high. Now many ambitious IT staff to make their own configuration files compatible with the market demand, to realize their ideals through these hot IT exam certification. Achieved excellent results in the Citrix 1Y0-A28 exam. With the Citrix 1Y0-A28 exam training of IT-Tests.com, the door of the dream will open for you.

1Y0-A28 (Implementing NetScaler 10 for Networking and Traffic Optimization) Free Demo Download: http://www.it-tests.com/1Y0-A28.html

NO.1 The network engineer would like all HTTP and HTTPS requests that travel through the
NetScaler to have an HTTP header added with the source IP address for logging on the web servers.
How should the network engineer accomplish this?
A. Enable Web Logging
B. Enable the client IP option
C. Configure the TCP Parameters
D. Enable the 'Use Source IP mode'
Answer: B

Citrix   1Y0-A28   1Y0-A28 answers real questions   1Y0-A28   1Y0-A28
6. A network engineer has configured two NetScaler MPX appliances as a high availability (HA)
pair.
What can the engineer configure to prevent failover if only a single interface fails?
A. FIS
B. PBR
C. SNMP
D. VMAC
Answer: A

Citrix certification   1Y0-A28 test questions   1Y0-A28
7. Scenario: A NetScaler appliance currently has a manually configured channel containing four
interfaces;
however, the engineer has been told that the NetScaler must now only use a single interface for this
network.
The engineer removes the channel and immediately notices a decrease in network performance.
How could the engineer resolve this issue?
A. Reset the unused interfaces
B. Disable the unused interfaces
C. Enable flow control on all interfaces
D. Disable HA monitoring on the three interfaces that are no longer required
Answer: B

Citrix   1Y0-A28   1Y0-A28   1Y0-A28 exam dumps
8. Scenario: A NetScaler engineer needs to enable access to some web servers running on an
IPv6-only network. The clients connecting
the services are
on an IPv4 network. The
engineer has already enabled IPv6 on the NetScaler. What does the engineer need to do in order to
provide access to the services on the IPv6 network?
A. Create an IPv6 tunnel and a IPv4 virtual server.
B. Configure an IPv6 VLAN and bind the required interface.
C. Create a IPv4 virtual server and bind the service group to it.
D. Create an IPv6 ACL and a IPv4 virtual server and bind the ACL to the virtual server.
Answer: C

Citrix original questions   1Y0-A28 exam   1Y0-A28 test questions   1Y0-A28 test answers   1Y0-A28 pdf   1Y0-A28
9. Scenario: An engineer executes the following commands: add vlan 2 bind vlan 2 -ifnum 1 / 2 add
ns ip 10.110.4.200 255.255.255.0 bind vlan 2 -IPAddress 10.110.4.200 255.255.255.0 What type of
IP address has been added to the NetScaler?
A. VIP address
B. NSIP address
C. SNIP address
D. GSLB Site IP address
Answer: C

Citrix   1Y0-A28 exam dumps   1Y0-A28 study guide   1Y0-A28 certification training   1Y0-A28   1Y0-A28 dumps
10. Scenario: A network engineer needs to configure Citrix NetScaler to provide Access Gateway
services to VLAN 2 using interface 1 /1 only, while also using interface 1 / 2 to provide load balancing
services to VLAN 3. How could this result be achieved?
A. Disable static route advertisement.
B. Disable layer 2 mode Create 2 untagged VLANs - VLAN 2 and VLAN 3 Bind VLAN 2 to Interface 1 /1
Bind VLAN 3 to Interface 1 / 2
C. Enable Layer 3 mode Create a Channel Interface using Interface 1 /1 and 1 / 2 Create 2 VMACs Bind
a VMAC to interface 1 /1 and 1 / 2
D. Configure policy-based routing using the Interface option as a filter.
Answer: B

Citrix exam dumps   1Y0-A28 practice test   1Y0-A28   1Y0-A28 study guide
11. Scenario: A network engineer needs to re-configure the NetScaler to utilize two new VLANs -
VLAN2 and VLAN3. VLAN2 is an untagged VLAN and VLAN3 will require a .1q compliant tag.
Interface 1 /1 is the only interface that
will be used on the NetScaler. How could the engineer configure
the NetScaler so that it can communicate with both networks?
A. Change the NSVLAN to 3 Add VLAN 2 and bind interface 1 /1 as untagged
B. Enable the Tag all VLANs option on interface 1 /1.
C. Add VLAN2 and bind interface 1 /1 as untagged Add VLAN3 and bind interface 1 /1 as tagged
D. Add a SNIP for each VLAN Enable management access on the SNIP for VLAN3
Answer: C

Citrix   1Y0-A28   1Y0-A28 exam   1Y0-A28 exam
12. Why would an engineer want to specify a TCP Profile for a specific service group?
A. To enable use of features like SSL over TCP for that specific service group.
B. To adjust the TCP settings for traffic to and from that specific service group.
C. To use a specific SNIP for traffic to the back-end servers in that service group.
D. To enable features like use source IP , TCP keep alive and TCP buffering for a specific service group.
Answer: B

Citrix test   1Y0-A28 original questions   1Y0-A28 exam prep   1Y0-A28   1Y0-A28   1Y0-A28 answers real questions

NO.2 Scenario: The NetScaler has connections to a large number of VPNs. The network engineer
wants to minimize
the number of ARP requests. Which feature should the network engineer enable to minimize ARP
requests?
A. TCP Buffering
B. Use Source IP
C. Edge Configuration
D. MAC based forwarding
Answer: D

Citrix exam prep   1Y0-A28   1Y0-A28 test answers

NO.3 An engineer has two NetScaler devices in two different datacenters and wants to create a high
availability (HA) pair with the two devices, even though they are on two different subnets.
How can the engineer configure the HA Pair between the two NetScaler devices?
A. Configure StaySecondary on the second datacenter appliance.
B. Ensure that INC mode is enabled during the creation of the HA Pair.
C. Enable the HAMonitors on all interfaces after the HA Pair has been created.
D. Change the NSIP of the second appliance to be on the same subnet as the first appliance.
Answer: B

Citrix   1Y0-A28 exam dumps   1Y0-A28   1Y0-A28 test   1Y0-A28

NO.4 A network engineer needs to upgrade both appliances of a High Availability (HA)
pair. In which order should the network engineer upgrade the appliances?
A. Disable high availability and upgrade one node at a time.
B. Upgrade the primary node first without disabling high availability.
C. Upgrade the secondary node first without disabling high availability.
D. Perform the upgrade simultaneously without disabling high availability.
Answer: C

Citrix   1Y0-A28 demo   1Y0-A28   1Y0-A28 certification training

NO.5 What should a network engineer do to prevent unauthorized users from using the root user
account?
A. Reset the nsroot account.
B. Change the nsroot password.
C. Create an authorization policy.
D. Bind a policy to the root user account.
Answer: B

Citrix   1Y0-A28 practice test   1Y0-A28 certification

IT-Tests.com offer the latest HP2-N42 Questions & Answers and high-quality LOT-406 PDF Practice Test. Our 70-483 VCE testing engine and E20-891 study guide can help you pass the real exam. High-quality 70-247 Real Exam Questions can 100% guarantee you pass the exam faster and easier. Pass the exam to obtain certification is so simple.

Article Link: http://www.it-tests.com/1Y0-A28.html