Exam HP0-Y35 VCE

We are aware that the IT industry is a new industry. It is one of the chain to drive economic development. So its status can not be ignored. IT certification is one of the means of competition in the IT industry. Passed the certification exam you will get to a good rise. But pass the exam is not easy. It is recommended that using training tool to prepare for the exam. If you want to choose this certification training resources, IT-Tests.com's HP HP0-Y35 exam training materials will be the best choice. The success rate is 100%, and can ensure you pass the exam.

If you IT-Tests, IT-Tests.com can ensure you 100% pass HP certification HP0-Y35 exam. If you fail to pass the exam, IT-Tests.com will full refund to you.

Exam Code: HP0-Y35
Exam Name: HP (Wireless Networks - ASE 2011 Delta Exam)
Free One year updates to match real exam scenarios, 100% pass and refund Warranty.
Total Q&A: 75 Questions and Answers
Last Update: 2013-12-05

We will not only ensure you to pass the exam, but also provide for you a year free update service. If you are not careful to fail to pass the examination, we will full refund to you. However, this possibility is almost not going to happen. We can 100% help you pass the exam, you can download part of practice questions from IT-Tests.com as a free try.

IT-Tests's expert team use their experience and knowledge to study the examinations of past years and finally have developed the best training materials about HP certification HP0-Y35 exam. Our HP certification HP0-Y35 exam training materials are very popular among customers and this is the result ofIT-Tests's expert team industrious labor. The simulation test and the answer of their research have a high quality and have 95% similarity with the true examination questions. IT-Tests.com is well worthful for you to rely on. If you use IT-Tests's training tool, you can 100% pass your first time to attend HP certification HP0-Y35 exam.

IT-Tests's expert team has developed a latest short-term effective training scheme for HP certification HP0-Y35 exam, which is a 20 hours of training for the candidates of HP certification HP0-Y35 exam. After training they can not only quickly master a lot of knowledge, but also consolidate their original knowledge. So they can easily pass HP certification HP0-Y35 exam and it is much more cost-effective for them than those who spend a lot of time and energy to prepare for the examination.

Now in this time so precious society, I suggest you to choose IT-Tests.com which will provide you with a short-term effective training, and then you can spend a small amount of time and money to pass your first time attend HP certification HP0-Y35 exam.

You can first download IT-Tests's free exercises and answers about HP certification HP0-Y35 exam as a try, then you will feel that IT-Tests.com give you a reassurance for passing the exam. If you choose IT-Tests.com to provide you with the pertinence training, you can easily pass the HP certification HP0-Y35 exam.

HP0-Y35 (Wireless Networks - ASE 2011 Delta Exam) Free Demo Download: http://www.it-tests.com/HP0-Y35.html

NO.1 Click the Exhibit button.
When IRF with Distributed Link Aggregation is implemented at all layers of a LAN (Core,
Aggregation, and Access), which protocols can be replaced by IRF functions? (Select two.)
A. MSTP
B. LACP
C. BFD
D. NSF/GR
E. VRRP
Answer: A,E

HP test questions   HP0-Y35   HP0-Y35   HP0-Y35

NO.2 Click the Exhibit button.
A network administrator is managing an HP A-Series Wireless Access Controller at the command
line interface (CLI). The administrator issues a command to view the contents of the controller
flash directory. Looking at the output, which access point models can the controller boot and
command to view the contents of the controller? flash directory. Looking at the output, which
access point models can the controller boot and manage? (Select two.)
A. HP WA2220-AG
B. HP WA2612-AGN
C. HP WA2620-AGN
D. HP WA2610E-AGN
E. HP WA2620E-AGN
Answer: B,C

HP   HP0-Y35 exam   HP0-Y35 demo

NO.3 Which roles are supported by the sFlow standard?
A. agent and collector only
B. probe and collector only
C. agent, collector, and analyzer
D. probe, collector, and analyzer
Answer: A

HP   HP0-Y35 original questions   HP0-Y35 questions   HP0-Y35

NO.4 After a MAD enabled IRF-stack splits, what happens to the part of the stack that entered Recovery
state?
A. All ports, except for the IRF-ports, BFD enabled ports, and console ports are shut down.
B. All ports, except for the IRF-ports, LACP enabled Link aggregation groups, console ports, and
manually excluded ports are shut down.
C. All ports, except for the IRF-ports, console ports, and manually excluded ports, are shut down.
D. All ports except for manually excluded ports are shut down.
Answer: C

HP answers real questions   HP0-Y35 pdf   HP0-Y35 test answers   HP0-Y35 test   HP0-Y35

NO.5 Using HP A5800 switches, which element must be configured in all switches involved in Layer 2
remote port mirroring?
A. remote-mirroring group
B. mirroring-ingress port
C. monitor-egress port
D. remote-probe VLAN
Answer: D

HP   HP0-Y35   HP0-Y35   HP0-Y35 test   HP0-Y35

NO.6 In an IRF stack, which operational plane is centralized (in the Master) and which is distributed
(among all members)?
A. Management: centralized
Control: centralized
Forwarding: centralized
B. Management: distributed
Control: distributed
Forwarding: distributed
C. Management: centralized
Control: distributed
Forwarding: distributed
D. Management: distributed
Control: centralized
Forwarding: distributed
E. Management: centralized
Control: centralized
Forwarding: distributed
Answer: E

HP   HP0-Y35   HP0-Y35 dumps

NO.7 Which sampling mechanisms are available in sFlow in A-Series switches and routers? (Select
two.)
A. packet-based
B. packet-length-based
C. time-based
D. ip-protocol-based
E. ip-source-address-based
F. mac-address-based
Answer: A,C

HP   HP0-Y35 exam   HP0-Y35 demo

NO.8 Given an HP A5800 switch that is in its factory default configuration, what happens after the
following command sequence? (Note: There is no save command.) system-view irf member 1
renumber 2 quit reboot
A. The IRF member ID will be 1.
B. The IRF member ID will be 2.
C. The IRF member ID will be assigned dynamically.
D. The IRF member ID will be "unknown."
Answer: B

HP   HP0-Y35   HP0-Y35   HP0-Y35 braindump   HP0-Y35

NO.9 Which protocols/technologies can be used to implement IRF MAD? (Select two.)
A. NSF/GR
B. ICMP
C. IGMP
D. BFD
E. LACP
Answer: D,E

HP   HP0-Y35   HP0-Y35 certification training   HP0-Y35

NO.10 You have been asked to deploy an additional HP A-Series wireless access point in the conference room
of an advertising agency. You connect to the CLI of the access controller and create an AP management
template. In which view do you specify the serial number of the access point?
A. Radio view
B. Service Template view
C. AP view
D. ESS Interface view
Answer: C

HP exam prep   HP0-Y35 braindump   HP0-Y35 questions   HP0-Y35 questions   HP0-Y35 test

NO.11 You have been asked to deploy a guest wireless service within an A-Series solution in the
reception area of a marketing firm. The clients associated with the guest service should be
assigned to VLAN 10. In which view do you assign the VLAN to the wireless service?
A. System view
B. Service Template view
C. VLAN Interface view
D. ESS Interface view
Answer: D

HP   HP0-Y35 practice test   HP0-Y35 pdf   HP0-Y35   HP0-Y35

NO.12 Click the Exhibit button.
You have been asked to configure the switching engine of an HP A3000-24G PoE+ Wireless
Switch. First, you log in to the CLI of the access controller and then move to the System view. You
then attempt to issue the partial command oap co and use the Tab key to complete it. However,
the CLI does not complete the command but issues a line return instead, as shown in the exhibit.
What must you do to connect to the CLI of the switching engine?
A. Return to the User view and then issue the command.
B. Enter the OAP view and then issue the command.
C. Use the CTRL+K key combination to access the CLI of the switching engine.
D. Telnet directly to the IPaddress of the switching engine and issue the command.
Answer: A

HP certification training   HP0-Y35 certification training   HP0-Y35   HP0-Y35   HP0-Y35 exam simulations

NO.13 What are acceptable topologies for an IRF-Stack? (Select two.)
A. star
B. tree
C. daisy-chain
D. mesh
E. ring
Answer: C,E

HP dumps   HP0-Y35   HP0-Y35   HP0-Y35

NO.14 Click the Exhibit button.
An IRF-stack is being built using HP A5800 switches, and IRF member 1 will be connected to IRF
member 2 using IRF-port 2. Which IRF-port should it be connected to?
A. 1
B. 2
C. 3
D. any
Answer: A

HP   HP0-Y35 certification   HP0-Y35 dumps   HP0-Y35

NO.15 Click the Exhibit button.
You have recently upgraded the Comware of an HP A-Series Access Controller (AC). Prior to
rebooting the device, you issued the dir command to display the contents of the flash root
directory. Upon reboot, the AC does not successfully run the new version of firmware. What is the issue?
A. The device does not have enough memory to run the new firmware.
B. The filename of the firmware is incorrect.
C. The new firmware is not present in the root directory.
D. Thebootware of the device requires updating as well.
Answer: B

HP questions   HP0-Y35   HP0-Y35 original questions

IT-Tests.com offer the latest 70-684 Questions & Answers and high-quality 70-561 PDF Practice Test. Our 70-462 VCE testing engine and 1z0-593 study guide can help you pass the real exam. High-quality 000-652 Real Exam Questions can 100% guarantee you pass the exam faster and easier. Pass the exam to obtain certification is so simple.

Article Link: http://www.it-tests.com/HP0-Y35.html