HP certification HP0-Y32 exam targeted exercises

HP HP0-Y32 is one of the important certification exams. IT-Tests's experienced IT experts through their extensive experience and professional IT expertise have come up with IT certification exam study materials to help people pass HP Certification HP0-Y32 exam successfully. IT-Tests's providing learning materials can not only help you 100% pass the exam, but also provide you a free one-year update service.

You can free download part of IT-Tests's practice questions and answers about HP certification HP0-Y32 exam online, as an attempt to test our quality. As long as you choose to purchase IT-Tests's products, we will do our best to help you pass HP certification HP0-Y32 exam disposably.

IT-Tests.com is a professional IT certification sites, the certification success rate is 100%. This number is proved by candidates through practice. Because IT-Tests.com has a strong IT team of experts, they are committed to study exam questions and answers, and serve the vital interests of the majority of candidates. They use their own professional mind and experience to meet the needs of the candidates. According to the needs of the candidate, they consider the issue from all angles, and manufacturing applicability exam training materials. This material is HP HP0-Y32 exam training materials, which including questions and answers.

To choose our IT-Tests.com to is to choose success! IT-Tests.com provide you HP certification HP0-Y32 exam practice questions and answers, which enable you to pass the exam successfully. Simulation tests before the formal HP certification HP0-Y32 examination are necessary, and also very effective. If you choose IT-Tests, you can 100% pass the exam.

Exam Code: HP0-Y32
Exam Name: HP (Design and Troubleshooting Open Standard Networks)
Free One year updates to match real exam scenarios, 100% pass and refund Warranty.
Total Q&A: 75 Questions and Answers
Last Update: 2013-12-05

HP0-Y32 (Design and Troubleshooting Open Standard Networks) Free Demo Download: http://www.it-tests.com/HP0-Y32.html

NO.1 Click the Exhibit button.
You install two E5400 zl Series switches and connect them with a two-port static trunk. All hosts on both
switches are in VLAN 20. However, some hosts on Core 1 cannot ping some hosts on Core 2 and vice
versa. All hosts can ping all hosts on their own switch. Event logs on the two switches do not show
significant errors. What should you do to determine the cause of this connectivity issue? (Select three.)
A. Use traceroute to determine which device is dropping the ping packets.
B. Verify the trunk configuration on each core switch.
C. Change the IP address for the default VLAN on Core 2 so that it is in the same subnet as the default
VLAN on Core 1.
D. Verify physical connectivity between the switches.
E. Use LLDP to check the identities of the devices and their neighbors.
Answer: BDE

HP exam   HP0-Y32   HP0-Y32 test   HP0-Y32 test

NO.2 Click the Exhibit button.
A user adds an untagged link between switch 20c and 30b. Which link transitions are blocked on subnet
20?
A. link from 20b to 20c
B. link from 20a to 20c
C. link from 20a to 20b
D. link from 20c to 30b
Answer: C

HP   HP0-Y32   HP0-Y32   HP0-Y32 exam simulations

NO.3 Click the Exhibit button.
You need to limit the amount of broadcast traffic in this customer's network. In order to do so, you add a
second VLAN, VLAN2 (10.0.1.0/24). Now, clients on VLAN2 cannot reach the Internet and cannot ping
clients on VLAN1. They can successfully ping the default gateway (10.0.1.1). What should you do first to
determine the cause of the problem?
A. Disable broadcast limiting on the core switch.
B. Check the ISP's firewall settings and modify accordingly.
C. Request the configuration of the network devices.
D. Request a network trace from the ISP.
E. Get the MAC address table of the network devices.
Answer: C

HP practice test   HP0-Y32 braindump   HP0-Y32 pdf

NO.4 Which step will provide helpful information about the issue?
A. Analyze the port statistics for the client you are pinging from.
B. Compare the arp table entries on the client when it works and when it does not.
C. Analyze the port statistics for the switch to which the client is connected.
D. Analyze the port statistics for all clients in VLAN 2 when the problem occurs.
Answer: B

HP   HP0-Y32   HP0-Y32 answers real questions

NO.5 Based on these basic facts, what can you "rule out" as possible causes of this problem? (Select three.)
A. the external gateway having no route to VLAN 2
B. misconfigured clients in VLAN1
C. a transient layer 1 issue
D. the firewall enabled on the client causing connectivity issues
E. a loop in VLAN1
Answer: ACD

HP   HP0-Y32 exam   HP0-Y32 exam   HP0-Y32 exam dumps   HP0-Y32

NO.6 You install new category 6a home run network cables for all users. You test a random sampling of the
cables, and they all pass. Users are complaining about dropped packets, slowness, and other intermittent
results. What is the best tool to use for initial troubleshooting?
A. Simple Network Management Protocol (SNMP)
B. Time Domain Reflectometer (TDR)
C. Packet Analyzer
D. HP Intelligent Communications Manager (ICM)
Answer: B

HP test answers   HP0-Y32 exam simulations   HP0-Y32 study guide   HP0-Y32   HP0-Y32 certification training

NO.7 You are working with a customer who has reported connectivity issues on a specific VLAN. All of their
clients were previously in VLAN1 until VLAN10 was added in order to limit the amount of broadcast traffic.
Now, the clients on VLAN10 cannot reach the Internet. These clients cannot ping clients on VLAN1, but
can successfully ping the default gateway. Which information will help you troubleshoot this problem?
(Select two.)
A. network topology map
B. uptime of the network devices
C. network IP addressing scheme
D. names of all VLANS
E. a list of the NTP servers on the network
Answer: AC

HP   HP0-Y32   HP0-Y32   HP0-Y32

NO.8 Click the Exhibit button.
A user adds an untagged link between switch 20c and 30b. Which action can you take that will help you
discover this new link?
A. Investigate switch syslog information for gateway changes.
B. Compare route tables of both routers.
C. Review LLDP information on subnet 20 root bridge.
D. Follow path cost to root from subnet 20.
E. Initiate a traceroute from both subnets.
Answer: D

HP questions   HP0-Y32 exam   HP0-Y32 practice test   HP0-Y32 study guide   HP0-Y32

NO.9 Click the Exhibit button.
A user adds an untagged link between switch 20c and 30b. What is the impact of the user's actions?
A. Internet connectivity to subnet 20 users is broken.
B. STP Root Bridge of Subnet 20 moves.
C. All Subnet 20 traffic is routed through Subnet 30.
D. STP alternate path selection remains unchanged.
Answer: B

HP certification training   HP0-Y32 original questions   HP0-Y32 questions   HP0-Y32 study guide

NO.10 Click the Exhibit button.
Which issue does the Optical Time Domain Reflectometer (OTDR) show?
A. out of phase
B. extensive attenuation
C. loss of [optical] signal
D. bend or kink in the optical cable
E. low frequency roll-off C:\Pasban Work\Cert Paper
Exams\HP\HP0-Y32\HP0-Y32-A-Extracted\HP0-Y32-A-Extracted\HP0-Y32-A\23.JPG
Answer: D

HP answers real questions   HP0-Y32   HP0-Y32 questions   HP0-Y32 questions   HP0-Y32 original questions

IT-Tests.com offer the latest NS0-155 Questions & Answers and high-quality LOT-958 PDF Practice Test. Our 000-277 VCE testing engine and 000-318 study guide can help you pass the real exam. High-quality PMI-100 Real Exam Questions can 100% guarantee you pass the exam faster and easier. Pass the exam to obtain certification is so simple.

Article Link: http://www.it-tests.com/HP0-Y32.html