CheckPoint 156-315.71 for the latest training materials

What are you waiting for? Opportunity knocks but once. You can get CheckPoint 156-315.71 complete as long as you enter IT-Tests.com website. You find the best 156-315.71 exam training materials, with our exam questions and answers, you will pass the exam.

The appropriate selection of training is a guarantee of success. However, the choice is very important, IT-Tests.com popularity is well known, there is no reason not to choose it. Of course, Give you the the perfect training materials, if you do not fit this information that is still not effective. So before using IT-Tests.com training materials, you can download some free questions and answers as a trial, so that you can do the most authentic exam preparation. This is why thousands of candidates depends IT-Tests.com one of the important reason. We provide the best and most affordable, most complete exam training materials to help them pass the exam.

In life we mustn't always ask others to give me something, but should think what I can do for others. At work if you can create a lot of value for the boss, the boss of course care about your job, including your salary. The same reason, if we are always a ordinary IT staff, yhen you will be eliminated sooner or later . We should pass the IT exams, and go to the top step by step. IT-Tests.com's CheckPoint 156-315.71 exam materials can help you to find shortcut to success. There are a lot of IT people who have started to act. Success is in the IT-Tests.com CheckPoint 156-315.71 exam training materials. Of course you can not miss it.

Exam Code: 156-315.71

Exam Name: CheckPoint (Check Point Certified Security Expert R71)

IT-Tests.com provide a good after-sales service for all customers. If you choose to purchase IT-Tests.com products, IT-Tests.com will provide you with online service for 24 hours a day and one year free update service, which timely inform you the latest exam information to let you have a fully preparation. We can let you spend a small amount of time and money and pass the IT certification exam at the same time. Selecting the products of IT-Tests.com to help you pass your first time CheckPoint certification 156-315.71 exam is very cost-effective.

IT-Tests.com is the leader in the latest CheckPoint 156-315.71 exam certification and exam preparation provider. Our resources are constantly being revised and updated, with a close correlation. If you prepare CheckPoint 156-315.71 certification, you will want to begin your training, so as to guarantee to pass your exam. As most of our exam questions are updated monthly, you will get the best resources with market-fresh quality and reliability assurance.

In this competitive society, being good at something is able to take up a large advantage, especially in the IT industry. Gaining some IT authentication certificate is very useful. CheckPoint 156-315.71 is a certification exam to test the IT professional knowledge level and has a Pivotal position in the IT industry. While CheckPoint 156-315.71 exam is very difficult to pass, so in order to pass the CheckPoint certification 156-315.71 exam a lot of people spend a lot of time and effort to learn the related knowledge, but in the end most of them do not succeed. Therefore IT-Tests.com is to analyze the reasons for their failure. The conclusion is that they do not take a pertinent training course. Now IT-Tests.com experts have developed a pertinent training program for CheckPoint certification 156-315.71 exam, which can help you spend a small amount of time and money and 100% pass the exam at the same time.

156-315.71 (Check Point Certified Security Expert R71) Free Demo Download: http://www.it-tests.com/156-315.71.html

NO.1 Check point Clustering protocol, works on:
A. UDP 8116
B. UDP 500
C. TCP 8116
D. TCP 19864
Answer: A

CheckPoint   156-315.71 dumps   156-315.71 braindump   156-315.71

NO.2 Refer to Exhibit:
Match the ClusterXL Modes with their configurations
A. A-3, B-2, C-1, D-4
B. A-3, B-2, C-4, D-1
C. A-2, B-3, C-4, D-1
D. A-2, B-3, C-1, D-4
Answer: C

CheckPoint test questions   156-315.71   156-315.71

NO.3 What is a task of the SmartEvent Correlation Unit?
A. Add events to the events database.
B. Look for patterns according to the installed Event Policy.
C. Assign a severity level to an event
D. Display the received events.
Answer: B

CheckPoint   156-315.71   156-315.71 demo

NO.4 Which of the following is NOT a feature of ClusterXL?
A. Enhanced throughput in all ClusterXL modes (2 gateway cluster compared with 1 gateway)
B. Transparent failover in case of device failures
C. Zero downtime for mission-critical environments with State Synchronization
D. Transparent upgrades
Answer: C

CheckPoint   156-315.71   156-315.71 original questions   156-315.71 test   156-315.71   156-315.71

NO.5 You want to verify that your Check Point cluster is working correctly. Which command line tool can you
use?
A. cphaconf state
B. cphaprob state
C. cphainfo-s
D. cphastart -status
Answer: B

CheckPoint questions   156-315.71 practice test   156-315.71 certification   156-315.71   156-315.71

NO.6 Control connections between the Security Management Server and the Gateway are not encrypted by
the VPN Community. How are these connections secured?
A. They are encrypted and authenticated using SIC.
B. They are not encrypted, but are authenticated by the Gateway
C. They are secured by PPTP
D. They are not secured.
Answer: D

CheckPoint   156-315.71   156-315.71 exam   156-315.71 exam simulations   156-315.71

NO.7 Which of the following manages Standard Reports and allows the administrator to specify automatic
uploads of reports to a central FTP server?
A. Smart Dashboard Log Consolidator
B. Security Management Server
C. Smart Reporter Database
D. Smart Reporter
Answer: D

CheckPoint   156-315.71   156-315.71   156-315.71

NO.8 Which of the following statements about the Port Scanning feature of IPS is TRUE?
A. The default scan detection is when more than 500 open inactive ports are open for a period of 120
seconds.
B. The Port Scanning feature actively blocks the scanning, and sends an alert to SmartView Monitor.
C. Port Scanning does not block scanning; it detects port scans with one of three levels of detection
sensitivity.
D. When a port scan is detected, only a log is issued, never an alert.
Answer: C

CheckPoint test questions   156-315.71 questions   156-315.71 test   156-315.71 study guide

NO.9 When you check Web Server in a host-node object, what happens to the host?
A. The Web server daemon is enabled on the host.
B. More granular controls are added to the host, in addition to Web Intelligence tab settings.
C. You can specify allowed ports in the Web server's node-object properties. You then do not need to list
all allowed ports in the Rule Base.
D. IPS Web Intelligence is enabled to check on the host.
Answer: B

CheckPoint   156-315.71 certification training   156-315.71   156-315.71

NO.10 You need to publish SecurePlatform routes using the ospf routing protocol. What is the correct
command structure, once entering the route command, to implement ospf successfully?
A. Run cpconfig utility to enable ospf routing
B. ip route ospf
ospf network1
ospf network2
C. Enable
Configure terminal
Router ospf [id]
Network [network] [wildmask] area [id]
D. Use DBedit utility to either the objects_5_0.c file
Answer: C

CheckPoint study guide   156-315.71   156-315.71 pdf

NO.11 What command will allow you to disable sync on a cluster firewall member?
A. fw ctl setsync 0
B. fw ctl sysnstat stop
C. fw ctl sysnstat off
D. fw ctl setsyns off
Answer: D

CheckPoint test   156-315.71 questions   156-315.71   156-315.71 pdf

NO.12 John is configuring a new R71 Gateway cluster but he can not configure the cluster as Third Party IP
Clustering because this option is not available in Gateway Cluster Properties: What's happening?
A. John is not using third party hardware as IP Clustering is part of Check Point's IP Appliance B .Third
Party Clustering is not available for R71 Security Gateways.
B. ClusterXL needs to be unselected to permit 3rd party clustering configuration.
C. John has an invalid ClusterXL license.
Answer: C

CheckPoint   156-315.71 pdf   156-315.71 answers real questions   156-315.71

NO.13 Which procedure creates a new administrator in SmartWorkflow?
A. Run cpconfig, supply the Login Name. Profile Properties, Name, Access Applications and Permissions.
B. In SmartDashboard, click SmartWorkflow / Enable SmartWorkflow and the Enable SmartWorkflow
wizard will start. Supply the Login Name, Profile Properties, Name, Access Applications and Permissions
when prompted.
C. On the Provider-1 primary MDS, run cpconfig, supply the Login Name, Profile Properties, Name,
Access Applications and Permissions.
D. In SmartDashboard, click Users and Administrators right click Administrators / New Administrator and
supply the Login Name. Profile Properties, Name, Access Applications and Permissions.
Answer: D

CheckPoint exam   156-315.71   156-315.71 test questions

NO.14 Organizations are sometimes faced with the need to locate cluster members in different geographic
locations that are distant from each other. A typical example is replicated data centers whose location is
widely separated for disaster recovery purposes.
What are the restrictions of this solution?
A. There are no restrictions.
B. There is one restriction: The synchronization network must guarantee no more than 150 ms latency
(ITU Standard G.114).
C. There is one restriction: The synchronization network must guarantee no more than 100 ms latency.
D. There are two restrictions: 1. The synchronization network must guarantee no more than 100ms
latency and no more than 5% packet loss. 2. The synchronization network may only include switches and
hubs.
Answer: D

CheckPoint certification training   156-315.71   156-315.71   156-315.71 certification training   156-315.71 braindump

NO.15 You are MegaCorp Security Administrator. This company uses a firewall cluster, consisting of two
cluster members. The cluster generally works well but one day you find that the cluster is behaving
strangely. You assume that there is a connectivity problem with the cluster synchronization cluster link
(cross-over cable).
Which of the following commands is the best for testing the connectivity of the crossover cable?
A. telnet <IP address of the synchronization interface on the other cluster member>
B. arping <IP address of the synchronization interface on the other cluster member>
C. ifconfig a
D. Ping <IP address of the synchronization interface on the other cluster member>
Answer: B

CheckPoint exam   156-315.71 certification training   156-315.71 exam dumps   156-315.71 questions

NO.16 Which of the following commands can be used to stop Management portal services?
A. fw stopportal
B. cpportalstop
C. cpstop / portal
D. smartportalstop
Answer: D

CheckPoint practice test   156-315.71 certification   156-315.71   156-315.71 questions   156-315.71 exam prep

NO.17 How does a cluster member take over the VIP after a failover event?
A. Ping the sync interface
B. if list -renew
C. Broadcast storm
D. Gratuitous ARP
Answer: D

CheckPoint pdf   156-315.71   156-315.71

NO.18 Which external user authentication protocols are supported in SSL VPN?
A. LDAP, Active Directory, SecurID
B. DAP, SecurID, Check Point Password, OS Password, RADIUS, TACACS
C. LDAP, RADIUS, Active Directory, SecurID
D. LDAP, RADIUS, TACACS, SecurID
Answer: B

CheckPoint   156-315.71   156-315.71   156-315.71   156-315.71

NO.19 You are establishing a ClusterXL environment, with the following topology: External interfaces
192.168.10.1 and 192.168.10.2 connect to a VLAN switch. The upstream router connects to the same
VLAN switch. Internal interfaces 172.16 10.1 and 172.16.10.2 connect to a hub. 10.10.10.0 is the
synchronization network. The Security Management Server is located on the internal network with IP
172.16.10.3. What is the problem with this configuration?
A. There is an IP address conflict
B. The Security Management Server must be in the dedicated synchronization network, not the internal
network.
C. The Cluster interface names must be identical across all cluster members.
D. Cluster members cannot use the VLAN switch. They must use hubs.
Answer: B

CheckPoint practice test   156-315.71   156-315.71

NO.20 ________is a proprietary Check Point protocol. it is the basis for Check Point ClusterXL inter-module
communication.
A. RDP
B. CCP
C. CKPP
D. HA OPCODE
Answer: B

CheckPoint exam dumps   156-315.71   156-315.71   156-315.71 braindump   156-315.71 practice test   156-315.71

If you IT-Tests, IT-Tests.com can ensure you 100% pass CheckPoint certification 156-315.71 exam. If you fail to pass the exam, IT-Tests.com will full refund to you.