HP HP0-Y32 training and testing

Choosing to participate in HP certification HP0-Y32 exam is a wise choice, because if you have a HP HP0-Y32 authentication certificate, your salary and job position will be improved quickly and then your living standard will provide at the same time. But passing HP certification HP0-Y32 exam is not very easy, it need to spend a lot of time and energy to master relevant IT professional knowledge. IT-Tests.com is a professional IT training website to make the training scheme for HP certification HP0-Y32 exam. At first you can free download part of exercises questions and answers about HP certification HP0-Y32 exam on www.IT-Tests.com as a try, so that you can check the reliability of our product. Generally, if you have tried IT-Tests's products, you'll very confident of our products.

In order to meet the request of current real test, the technology team of research on IT-Tests.com HP HP0-Y32 exam materials is always update the questions and answers in time. We always accept feedbacks from users, and take many of the good recommendations, resulting in a perfect IT-Tests.com HP HP0-Y32 exam materials. This allows IT-Tests.com to always have the materials of highest quality.

HP HP0-Y32 certification can guarantee you have good job prospects, because HP certification HP0-Y32 exam is a difficult test of IT knowledge, passing HP certification HP0-Y32 exam proves that your IT expertise a strong and you can be qualified for a good job.

Exam Code: HP0-Y32

Exam Name: HP (Design and Troubleshooting Open Standard Networks)

You can free download part of IT-Tests's practice questions and answers about HP certification HP0-Y32 exam online. Once you decide to select IT-Tests, IT-Tests.com will make every effort to help you pass the exam. If you find that our exam practice questions and answers is very different form the actual exam questions and answers and can not help you pass the exam, we will immediately 100% full refund.

HP0-Y32 (Design and Troubleshooting Open Standard Networks) Free Demo Download: http://www.it-tests.com/HP0-Y32.html

NO.1 Click the Exhibit button.
Which issue does the Optical Time Domain Reflectometer (OTDR) show?
A. out of phase
B. extensive attenuation
C. loss of [optical] signal
D. bend or kink in the optical cable
E. low frequency roll-off C:\Pasban Work\Cert Paper
Exams\HP\HP0-Y32\HP0-Y32-A-Extracted\HP0-Y32-A-Extracted\HP0-Y32-A\23.JPG
Answer: D

HP answers real questions   HP0-Y32 certification   HP0-Y32 pdf   HP0-Y32 test   HP0-Y32

NO.2 You are working with a customer who has reported connectivity issues on a specific VLAN. All of their
clients were previously in VLAN1 until VLAN10 was added in order to limit the amount of broadcast traffic.
Now, the clients on VLAN10 cannot reach the Internet. These clients cannot ping clients on VLAN1, but
can successfully ping the default gateway. Which information will help you troubleshoot this problem?
(Select two.)
A. network topology map
B. uptime of the network devices
C. network IP addressing scheme
D. names of all VLANS
E. a list of the NTP servers on the network
Answer: AC

HP   HP0-Y32 exam prep   HP0-Y32 demo

NO.3 Click the Exhibit button.
A user adds an untagged link between switch 20c and 30b. What is the impact of the user's actions?
A. Internet connectivity to subnet 20 users is broken.
B. STP Root Bridge of Subnet 20 moves.
C. All Subnet 20 traffic is routed through Subnet 30.
D. STP alternate path selection remains unchanged.
Answer: B

HP   HP0-Y32 exam simulations   HP0-Y32

NO.4 You install new category 6a home run network cables for all users. You test a random sampling of the
cables, and they all pass. Users are complaining about dropped packets, slowness, and other intermittent
results. What is the best tool to use for initial troubleshooting?
A. Simple Network Management Protocol (SNMP)
B. Time Domain Reflectometer (TDR)
C. Packet Analyzer
D. HP Intelligent Communications Manager (ICM)
Answer: B

HP exam dumps   HP0-Y32   HP0-Y32 braindump   HP0-Y32

NO.5 Click the Exhibit button.
You need to limit the amount of broadcast traffic in this customer's network. In order to do so, you add a
second VLAN, VLAN2 (10.0.1.0/24). Now, clients on VLAN2 cannot reach the Internet and cannot ping
clients on VLAN1. They can successfully ping the default gateway (10.0.1.1). What should you do first to
determine the cause of the problem?
A. Disable broadcast limiting on the core switch.
B. Check the ISP's firewall settings and modify accordingly.
C. Request the configuration of the network devices.
D. Request a network trace from the ISP.
E. Get the MAC address table of the network devices.
Answer: C

HP certification training   HP0-Y32   HP0-Y32

NO.6 Click the Exhibit button.
You install two E5400 zl Series switches and connect them with a two-port static trunk. All hosts on both
switches are in VLAN 20. However, some hosts on Core 1 cannot ping some hosts on Core 2 and vice
versa. All hosts can ping all hosts on their own switch. Event logs on the two switches do not show
significant errors. What should you do to determine the cause of this connectivity issue? (Select three.)
A. Use traceroute to determine which device is dropping the ping packets.
B. Verify the trunk configuration on each core switch.
C. Change the IP address for the default VLAN on Core 2 so that it is in the same subnet as the default
VLAN on Core 1.
D. Verify physical connectivity between the switches.
E. Use LLDP to check the identities of the devices and their neighbors.
Answer: BDE

HP   HP0-Y32 test   HP0-Y32 original questions   HP0-Y32

NO.7 Click the Exhibit button.
A user adds an untagged link between switch 20c and 30b. Which action can you take that will help you
discover this new link?
A. Investigate switch syslog information for gateway changes.
B. Compare route tables of both routers.
C. Review LLDP information on subnet 20 root bridge.
D. Follow path cost to root from subnet 20.
E. Initiate a traceroute from both subnets.
Answer: D

HP certification   HP0-Y32   HP0-Y32 answers real questions   HP0-Y32 certification

NO.8 Which step will provide helpful information about the issue?
A. Analyze the port statistics for the client you are pinging from.
B. Compare the arp table entries on the client when it works and when it does not.
C. Analyze the port statistics for the switch to which the client is connected.
D. Analyze the port statistics for all clients in VLAN 2 when the problem occurs.
Answer: B

HP pdf   HP0-Y32   HP0-Y32   HP0-Y32   HP0-Y32 test questions   HP0-Y32 exam simulations

NO.9 Based on these basic facts, what can you "rule out" as possible causes of this problem? (Select three.)
A. the external gateway having no route to VLAN 2
B. misconfigured clients in VLAN1
C. a transient layer 1 issue
D. the firewall enabled on the client causing connectivity issues
E. a loop in VLAN1
Answer: ACD

HP questions   HP0-Y32   HP0-Y32   HP0-Y32 original questions

NO.10 Click the Exhibit button.
A user adds an untagged link between switch 20c and 30b. Which link transitions are blocked on subnet
20?
A. link from 20b to 20c
B. link from 20a to 20c
C. link from 20a to 20b
D. link from 20c to 30b
Answer: C

HP exam prep   HP0-Y32   HP0-Y32   HP0-Y32 exam

IT-Tests.com provide training tools included HP certification HP0-Y32 exam study materials and simulation training questions and more importantly, we will provide you practice questions and answers which are very close with real certification exam. Selecting IT-Tests.com can guarantee that you can in a short period of time to learn and to strengthen the professional knowledge of IT and pass HP certification HP0-Y32 exam with high score.